Vinyl-Addition Homopolymeization of Norbornenes with Bromoalkyl Groups.

Vinyl-addition polynorbornenes are of great interest as versatile templates for the targeted design of polymer materials with desired properties. These polymers possess rigid and saturated backbones, which provide them with high thermal and chemical stability as well as high glass transition temperatures. Vinyl-addition polymers from norbornenes with bromoalkyl groups are widely used as precursors of anion exchange membranes; however, high-molecular-weight homopolymers from such monomers are often difficult to prepare. Herein, we report the systematic study of vinyl-addition polymerization of norbornenes with various bromoalkyl groups on Pd-catalysts bearing N-heterocyclic carbene ligands ((NHC)Pd-systems). Norbornenes with different lengths of hydrocarbon linker (one, two, and four CH2 groups) between the bicyclic norbornene moiety and the bromine atom were used as model monomers, while single- and three-component (NHC)Pd-systems were applied as catalysts. In vinyl-addition polymerization, the reactivity of the investigated monomers varied substantially. The relative reactivity of these monomers was assessed in copolymerization experiments, which showed that the closer the bromine is to the norbornene double-bond, the lower the monomer's reactivity. The most reactive monomer was the norbornene derivative with the largest substituent (with the longest linker). Tuning the catalyst's nature and the conditions of polymerization, we succeeded in synthesizing high-molecular-weight homopolymers from norbornenes with bromoalkyl groups (Mn up to 1.4 × 106). The basic physico-chemical properties of the prepared polymers were studied and considered together with the results of vinyl-addition polymerization.

Supramolecular Structure and Photo-Thermo-Electric Property of Hydrogen-Bonded Liquid Crystalline Polymer Containing Poly(4-vinylpridine) and Cyanostilbene Side Chains.

A series of side-chain liquid crystalline polymers P4VP(CN-DBE)x , where x is the molar ratio of cyanostilbene (CN-DBE) to poly(4-vinylpyridine) (P4VP) repeating unit, was synthesized based on the intermolecular hydrogen bonding between P4VP and CN-DBE. Their luminescent property, liquid crystalline structure and photo-thermo-electric property were elucidated using photoluminescence spectra, X-ray diffraction, thermal imaging and thermoelectric experiments. With the increase of x, the supramolecular system can be changed from lamellar structure to hexagonal columnar structure. Moreover, the P4VP(CN-DBE)x polymer with columnar structure exhibits more efficient photothermal effect. The temperature of P4VP(CN-DBE)0.6 can rise to 130 °C within 10 s under the irradiation of ultraviolet lamp. In addition, the supramolecular system possesses unique photo-thermo-electric conversion ability, and 25 mA current can be detected in the circuit coupled with the thermoelectric module. This work broadens the potential applications of hydrogen-bonded polymer, and provides a simple and facile strategy to prepare liquid crystalline polymers with photo-thermo-electric property.

Chiral Polymers from Norbornenes Based on Renewable Chemical Feedstocks.

Optically active polymers are of great interest as materials for dense enantioselective membranes, as well as chiral stationary phases for gas and liquid chromatography. Combining the versatility of norbornene chemistry and the advantages of chiral natural terpenes in one molecule will open up a facile route toward the synthesis of diverse optically active polymers. Herein, we prepared a set of new chiral monomers from cis-5-norbornene-2,3-dicarboxylic anhydride and chiral alcohols of various natures. Alcohols based on cyclic terpenes ((-)-menthol, (-)-borneol and pinanol), as well as commercially available alcohols (S-(-)-2-methylbutanol-1, S-(+)-3-octanol), were used. All the synthesized monomers were successfully involved in ring-opening metathesis polymerization, affording polymers in high yields (up to 96%) and with molecular weights in the range of 1.9 × 105-5.8 × 105 (Mw). The properties of the metathesis polymers obtained were studied by TGA and DSC analysis, WAXD, and circular dichroism spectroscopy. The polymers exhibited high thermal stability and good film-forming properties. Glass transition temperatures for the prepared polymers varied from -30 °C to +139 °C and, therefore, the state of the polymers changed from rubbery to glassy. The prepared polymers represent a new attractive platform of chiral polymeric materials for enantioselective membrane separation and chiral stationary phases for chromatography.

Gas-Transport and the Dielectric Properties of Metathesis Polymer from the Ester of exo-5-Norbornenecarboxylic Acid and 1,1'-Bi-2-naphthol.

Polymers from norbornenes are of interest for applications in opto- and microelectronic (low dielectric materials, photoresists, OLEDs). Norbornenes with ester motifs are among the most readily available norbornene derivatives. However, little is known about dielectric properties and the gas-transport of polynorbornenes from such monomers. Herein, we synthesized a new metathesis polymer from exo-5-norbornenecarboxylic acid and 1,1'-bi-2-naphthol. The designed monomer was obtained via a two-step procedure in a good yield. This norbornene derivative with a rigid and a bulky binaphthyl group was successfully polymerized over the 1st generation Grubbs catalyst, affording high-molecular-weight products (Mw ≤ 1.5·106) in yields of 94-98%. The polymer is amorphous and glassy (Tg = 161 °C), and it shows good thermal stability. Unlike most, polyNBi is a classic low-permeable glassy polymer. The selectivity of polyNBi was higher than that of polyNB. Being less permeable than polyNB, polyNBi unexpectedly showed a lower value of dielectric permittivity (2.7 for polyNBi vs. 5.0 for polyNB). Therefore, the molecular design of polynorbornenes has great potential to obtain polymers with desired properties in a wide range of required characteristics. Further tuning of the gas separation efficiency can be achieved by attaching an appropriate substituent to the ester and aryl group.

Ionomers Based on Addition and Ring Opening Metathesis Polymerized 5-phenyl-2-norbornene as a Membrane Material for Ionic Actuators.

Two types of poly(5-phenyl-2-norbornene) were synthesized via ring opening metathesis and addition polymerization. The polymers sulfonation reaction under homogeneous conditions resulted in ionomer with high sulfonation degree up to 79% (IEC 3.36 meq/g). The prepared ionomer was characterized by DSC, GPC, 1H NMR and FT-IR. Polymers for electromechanical applications soluble in common polar organic solvents were obtained by replacing proton of sulfonic group with imidazolium and 1-methylimidazlium. Membranes were prepared using the above-mentioned polymers and 1-ethyl-3-methylimidazolium tetrafluoroborate (EMImBF4), as well as mixtures with polyvinylidene fluoride (PVDF). Mechanical, morphological, and conductive properties of the membranes were examined by tensile testing, SEM, and impedance spectroscopy, respectively. Dry and air-stable actuators with electrodes based on SWCNT were fabricated via hot-pressing. Actuators with membranes based on methylimidazolium containing ionomers outperformed classical bucky gel actuator and demonstrated high strain (up to 1.14%) and generated stress (up to 1.21 MPa) under low voltage of 2 V.

Genotoxic Effect of Dicyclopropanated 5-Vinyl-2-Norbornene.

Dicyclopropanated 5-vinyl-2-norbornene (dcpVNB) is a strained polycyclic hydrocarbon compound with a high energy content, which makes it promising for the development of propellant components based on it. In this work, the genotoxic properties of dcpVNB were studied using whole-cell lux-biosensors based on Escherichia coli and Bacillus subtilis. It was shown that the addition of dcpVNB to bacterial cells leads to the appearance of DNA damage inducing the SOS response and Dps expression with slight activation of the OxyR-mediated response to oxidative stress. The highest toxic effect of dcpVNB is detected by the following lux-biosensors: E. coli pColD-lux, E. coli pDps, B. subtilis pNK-DinC, and B. subtilis pNK-MrgA, in which the genes of bacterial luciferases are transcriptionally fused to the corresponding promoters: Pcda, Pdps, PdinC, and PmrgA. It was shown that lux-biosensors based on B. subtilis, and E. coli are almost equally sensitive to dcpVNB, which indicates the same permeability to this compound of cell wall of Gram-positive and Gram-negative bacteria. The activation of Pdps after dcpVNB addition maintains even in oxyR mutant E. coli strains, which means that the Pdps induction is only partially determined by the OxyR/S regulon. Comparison of specific stress effects caused by dcpVNB and 2-ethyl(bicyclo[2.2.1]heptane) (EBH), characterized by the absence of cyclopropanated groups, shows that structural changes in hydrocarbons could significantly change the mode of toxicity.

Constructing of Bacillus subtilis-Based Lux-Biosensors with the Use of Stress-Inducible Promoters.

Here, we present a new lux-biosensor based on Bacillus subtilis for detecting of DNA-tropic and oxidative stress-causing agents. Hybrid plasmids pNK-DinC, pNK-AlkA, and pNK-MrgA have been constructed, in which the Photorhabdus luminescens reporter genes luxABCDE are transcribed from the stress-inducible promoters of B. subtilis: the SOS promoter PdinC, the methylation-specific response promoter PalkA, and the oxidative stress promoter PmrgA. The luminescence of B. subtilis-based biosensors specifically increases in response to the appearance in the environment of such common toxicants as mitomycin C, methyl methanesulfonate, and H2O2. Comparison with Escherichia coli-based lux-biosensors, where the promoters PdinI, PalkA, and Pdps were used, showed generally similar characteristics. However, for B. subtilis PdinC, a higher response amplitude was observed, and for B. subtilis PalkA, on the contrary, both the amplitude and the range of detectable toxicant concentrations were decreased. B. subtilis PdinC and B. subtilis PmrgA showed increased sensitivity to the genotoxic effects of the 2,2'-bis(bicyclo [2.2.1] heptane) compound, which is a promising propellant, compared to E. coli-based lux-biosensors. The obtained biosensors are applicable for detection of toxicants introduced into soil. Such bacillary biosensors can be used to study the differences in the mechanisms of toxicity against Gram-positive and Gram-negative bacteria.

Activation of Pd-precatalysts by organic compounds for vinyl-addition polymerization of a norbornene derivative.

An approach to activating Pd-complexes without using additives such as Lewis acids has been developed for addition polymerization of norbornenes. Aryl iodides and aryl diazonium salts were efficiently applied as cocatalysts to Pd(0)- and Pd(2+)-complexes. The developed systems catalyzed polymerization of norbornenes containing bulky and polar functional groups both in an inert atmosphere and air resulting in soluble and high-molecular-weight saturated polymers.

Synthesis and Gas Transport Properties of Addition Polynorbornene with Perfluorophenyl Side Groups.

Polynorbornenes represent a fruitful class of polymers for structure-property study. Recently, vinyl-addition polynorbornenes bearing side groups of different natures were observed to exhibit excellent gas permeation ability, along with attractive C4H10/CH4 and CO2/N2 separation selectivities. However, to date, the gas transport properties of fluorinated addition polynorbornenes have not been reported. Herein, we synthesized addition polynorbornene with fluoroorganic substituents and executed a study on the gas transport properties of the polymer for the first time. A norbornene-type monomer with a C6F5 group, 3-pentafluorophenyl-exo-tricyclononene-7, was successfully involved in addition polymerization, resulting in soluble, high-molecular-weight products obtained in good or high yields. By varying the monomer concentration and monomer/catalyst ratio, it was possible to reach Mw values of (2.93-4.35) × 105. The molecular structure was confirmed by NMR and FTIR analysis. The contact angle with distilled water revealed the hydrophobic nature of the synthesized polymer as expected due to the presence of fluoroorganic side groups. A study of the permeability of various gases (He, H2, O2, N2, CO2, and CH4) through the prepared polymer disclosed a synergetic effect, which was achieved by the presence of both bulky perfluorinated side groups and rigid saturated main chains. Addition poly(3-pentafluorophenyl-exo-tricyclononene-7) was more permeable than its metathesis analogue by a factor of 7-21, or the similar polymer with flexible main chains, poly(pentafluorostyrene), in relation to the gases tested. Therefore, this investigation opens the door to fluorinated addition polynorbornenes as new potential polymeric materials for membrane gas separation.

Synthesis and structure of 2,4,6-tri-cyclo-butyl-1,3,5-trioxane.

The synthesis and structure of 2,4,6,-tri-cyclo-butyl-1,3,5-trioxane, C15H24O3 1, is described. It was formed in 39% yield during the work-up of the Swern oxidation of cyclo-butyl-methanol and may serve as a stable precursor of the cyclo-butane carbaldehyde. The mol-ecule of 1 occupies a special position (3.m) located at the center of its 1,3,5-trioxane ring. The latter is in a chair conformation, with the symmetry-independent O and C atoms deviating by 0.651 (4) Šfrom the least-squares plane of the other atoms of the trioxane ring. All three cyclo-butane substituents, which have a butterfly conformation with an angle between the two planes of 25.7 (3)°, are in the cis conformation relative to the 1,3,5-trioxane ring. Inter-molecular C-H⋯O inter-actions between the 1,3,5-trioxane rings consolidate the crystal structure, forming stacks along the c-axis direction. The crystal studied was refined a as a racemic twin.

Data on synthesis and characterization of sulfonated poly(phenylnorbornene) and polymer electrolyte membranes based on it.

This article describes data on preparation of sulfonated hydrogenated poly(phenylnorbornene) with different cations synthesized via sequential ring-opening metathesis polymerization, reduction, homogeneous sulfonation and cation exchange reactions. The data of the characterization of new polymers by nuclear magnetic resonance (1H NMR) spectroscopy, Fourier-transform infrared (FT-IR) spectroscopy and differential scanning calorimetry (DSC) are presented. The effect of imidazolium and 1-methylimidazolium cations, ionic liquid and Zwitter-type ion liquid on ionic conductivities evaluated by impedance spectroscopy. Preparation procedure of polymer electrolyte membrane based on new polymers and Nafion as a blend with polyvinylidene fluoride (PVDF) is given. Scanning electron microscopy images and ionic conductivities of these membrane are presented.

Addition Polyalkylnorbornenes: A Promising New Class of Si-Free Membrane Materials for Hydrocarbons Separation.

Nanoporous glassy polymers are perspective materials for the fabrication of gas separation membranes, especially for the application of gaseous hydrocarbon separation. However, the drawback of such materials is the pronounced physical aging resulting in the dramatic drop of gas transport properties due to relaxation of high-free-volume fraction in time. Herein, a novel and readily available group of such glassy polymers is reported based on 5-alkylnorbornenes. These polymers are easily synthesized from dicyclopentadiene and α-olefins by Diels-Alder reaction and vinyl (addition) polymerization of the formed cycloadducts in the presence of ([(η3 -C3 H5 )PdCl]2 /PCy3 /Na+ [B(3,5-(CF3 )2 C6 H3 )4 ]- catalyst. The obtained polymers display low-fraction free volume, stable gas permeability over time, and possess a unique feature for the glassy polymers-solubility controlled permeation of hydrocarbons and enhanced C4 H10 /CH4 selectivity.

Mixed er-NHC/phosphine Pd(ii) complexes and their catalytic activity in the Buchwald-Hartwig reaction under solvent-free conditions.

A series of novel (NHC)PdCl2-PR3 complexes were synthesized and fully characterized by 1H, 13C, 31P NMR and FT-IR spectroscopy. These complexes showed high catalytic activity toward solvent-free Buchwald-Hartwig amination. Both primary and secondary amines were efficiently utilized under the same reaction conditions. The solvent-free synthesis of valuable N-aryl carbazoles and similar N-heterocyclic systems was described.

The selective hydrosilylation of norbornadiene-2,5 by monohydrosiloxanes.

A simple one-step approach for the selective synthesis of exo-norbornenes with organosilicon substituents is suggested through the direct hydrosilylation of norbornadiene-2,5 with chlorine-free silanes. Using the example of norbornadiene-2,5 hydrosilylation with pentamethyldisiloxane and 1,1,1,3,5,5,5-heptamethyltrisiloxane, the possibility of obtaining exo-isomers of norbornenes with 100 exo-/endo-selectivity is shown. The investigation of Pt-, Rh-, and Pd-complexes in combination with various ligands as catalysts was performed. The hydrosilylation of norbornadiene-2,5 in the presence of Pt- or Rh-catalysts was not selective and led to a mixture consisting of three isomers (exo-/endo-norbornenes and substituted nortricyclane). In the case of the Pd-salt/ligand catalytic system, the formation of an endo-isomer was not observed at all and only two isomers were formed (exo-norbornene and nortricyclane). The selectivity of exo-norbornene/nortricyclane formation strongly depended on the nature of the ligand in the Pd-catalyst. The best selectivity was revealed when R-MOP was the ligand, while the highest catalytic activity was reached with a dioxalane-containing ligand.

Correction: The selective hydrosilylation of norbornadiene-2,5 by monohydrosiloxanes.

[This corrects the article DOI: 10.1039/C9RA06784A.].

Microporous Materials Based on Norbornadiene-Based Cross-Linked Polymers.

New microporous homopolymers were readily prepared from norbornadiene-2,5, its dimer and trimer by addition (vinyl) polymerization of the corresponding monomers with 60⁻98% yields. As a catalyst Pd-N-heterocyclic carbene complex or Ni(II) 2-ethylhexanoate activated with Na⁺[B(3,5-(CF3)2C6H3)4]- or methylaluminoxane was used. The synthesized polynorbornenes are cross-linked and insoluble. They are glassy and amorphous polymers. Depending on the nature of the catalyst applied, BET surface areas were in the range of 420⁻970 m²/g. The polymers with the highest surface area were obtained in the presence of Pd-catalysts from the trimer of norbornadiene-2,5. The total pore volume of the polymers varies from 0.39 to 0.79 cm³/g, while the true volume of micropores was 0.14⁻0.16 cm³/g according to t-plot. These polymers gave CO2 uptake from 1.2 to 1.9 mmol/g at 273 K and 1 atm. The porous structure of new polymers was also studied by means of wide-angle X-ray diffraction and positron annihilation lifetime spectroscopy.